Good Quality Stepper Servo Motor With Driver – 2 phase dc18-40v M430 stepper motor driver – Bobet
Good Quality Stepper Servo Motor With Driver – 2 phase dc18-40v M430 stepper motor driver – Bobet Detail:
M430D
Stepper Motor Driver Specification
Overview
The M430D is a new generation microstep stepper motor driver. Due to the adoption of the advanced bipolar constant-current chopper driver technology, it shows stable operation, provides excellent high torque. Moreover, it significantly reduces the noises and vibration of the operating motor. The M430D has the feature of low-noise, low-vibration and low-heating. The M430D is DC18-40V power supply. It applies to 2-phase hybrid stepper motor under 3.0A current. The M430D has seven kinds of microsteps. The maximum step number is 12800 steps/rev (microstep is 1/64). The peak operating current ranges from 0.9A to 3.0A., and the output current has 8 stalls. The M430D has automatic semi-flow, motor misconnected protection functions and so on.
Applications
It can be applied in a variety of small scale automation equipment and instruments, such as labeling machine, cutting machine, packing machine, drawing machine, engraving machine, CNC machine and so on. It always performs well when it is used in equipment which requires for low-vibration, low-noise, high-precision and high-velocity.
Microstep selection
|
Pulse/Rev |
SW1 |
SW2 |
SW3 |
|
200 |
off |
off |
off |
|
400 |
on |
off |
off |
|
800 |
off |
on |
off |
|
1600 |
on |
on |
off |
|
3200 |
off |
off |
on |
|
6400 |
on |
off |
on |
|
12800 |
off |
on |
on |
Current selection
|
Peak |
RMS |
SW5 |
SW6 |
SW7 |
|
0.9A |
0.65A |
on |
on |
on |
|
1.2A |
0.86A |
on |
on |
off |
|
1.5A |
1.10A |
on |
off |
on |
|
1.8A |
1.28A |
on |
off |
off |
|
2.1A |
1.50A |
off |
on |
on |
|
2.4A |
1.72A |
off |
on |
off |
|
2.7A |
1.93A |
off |
off |
on |
|
3.0A |
2.14A |
off |
off |
off |
Driver functions descriptions
|
Driver function |
Operating instructions |
|
Output current setting |
Users can set the driver output current by SW5-SW7 three switches.
The setting of the specific output current, please refer to the instructions of the driver panel figure. |
|
Microstep setting |
Users can set the driver Microstep by the SW1-SW3 three switches. The setting of the specific Microstep subdivision, please refer to the instructions of the driver panel figure. SW4 and SW8 is vacancy, they do not need to be adjusted. |
|
Signal interfaces |
PUL is the setting pulse input; DIR is the stepper motor direction input; OPTO is the power supply for signal port + 5V; ENA is the motor free input. |
|
Motor interfaces |
A+ and A- are connected to a phase winding of motor; B+ and B- are connected to another phase winding of motor. If you need to backward, one of the phase windings can be reversed. |
|
Power interfaces |
It uses DC power supply. Recommended operating voltage is 18VDC-40VDC, and power consumption should be greater than 100W. |
|
Installation instructions |
Driver dimensions:117×71×35mm, please refer to dimensions diagram. Please leave 10CM space for heat dissipation. During installation, it should be close to the metal cabinet for heat dissipation. |
Signal interface details：
The internal interface circuits of the driver are isolated by the opt coupler signals, R in the figure is an external current limiting resistor. The connection is differential. And it has a good anti-jamming performance.
common cathode connection
common anode connection
Control signal and external interface：
|
Signal amplitudes |
External current limiting resistor R |
|
5V |
Without R |
|
12V |
680Ω |
|
24V |
1.8KΩ |
Product detail pictures:
Related Product Guide:
Cooperation
The customer satisfaction is our primary target. We uphold a consistent level of professionalism, quality, credibility and service for Good Quality Stepper Servo Motor With Driver – 2 phase dc18-40v M430 stepper motor driver – Bobet , The product will supply to all over the world, such as: Madras, Plymouth, Israel, Our professional engineering group will always be ready to serve you for consultation and feedback. We are able to also offer you with absolutely free samples to meet your requirements. Finest efforts will likely be produced to give you the ideal service and goods. For anyone who is thinking about our company and merchandise, please contact us by sending us emails or contact us quickly. As a way to know our merchandise and firm. lot more, you can come to our factory to find out it. We'll always welcome guests from all over the world to our business to build company relations with us. Please feel free to get in touch with us for business and we believe we are going to share the top trading practical experience with all our merchants.
By Doris from Cyprus - 2017.04.08 14:55
Problems can be quickly and effectively resolved, it is worth to be trust and working together.
By Jocelyn from Sri Lanka - 2018.07.12 12:19
