Good Quality Stepper Servo Motor With Driver – DM860A AC20V-80V NEMA 34 stepper motor driver – Bobet

Short Description:

DM860A Stepper Motor Driver Specification Overview The DM860A is a new generation high-performance digital stepper driver based on DSP and PID control algorithm with microstep control technology. The motors driven by DM860A can run with much smaller noise and much less vibration than other drivers in the market. The DM860A possess the feature of lower noise, lower vibration, and lower heating. The DM860A’s voltage is AC20V-80V(DC36-110V). It is suitable for all the 2-phase hybrid stepper mot...


Product Detail

Other Detail

Product Tags

Related Video

Feedback (2)

We normally think and practice corresponding on the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and also the living for Hub Motor , Dc Motor 400w , 2.2kw Spindle Motor , We cordially welcome shoppers from in the home and overseas to hitch us and cooperate with us to enjoy a better future.
Good Quality Stepper Servo Motor With Driver – DM860A AC20V-80V NEMA 34 stepper motor driver – Bobet Detail:

DM860A

Stepper Motor Driver Specification

Overview

The DM860A is a new generation high-performance digital stepper driver based on DSP and PID control algorithm with microstep control technology. The motors driven by DM860A can run with much smaller noise and much less vibration than other drivers in the market. The DM860A possess the feature of lower noise, lower vibration, and lower heating. The DM860A’s voltage is AC20V-80V(DC36-110V). It is suitable for all the 2-phase hybrid stepper motor whose current is less than 6.0A. There are 16 kinds of microstep of DM860A. The maximum step number of DM860A is 51200 steps/rev (microstep is 1/256 ). Its current range2.0A-6.0A, and its output current has 8 stalls.DM860A has automatic semi-flow, over-voltage, under voltage and over-current protection function.

Current selection

REF

Peak

SW1

SW2

SW3

2.00A

2.40A

ON

ON

ON

2.57A

3.08A

OFF

ON

ON

3.14A

3.77A

ON

OFF

ON

3.71A

4.45A

OFF

OFF

ON

4.28A

5.14A

ON

ON

OFF

4.86A

5.83A

  OFF

ON

OFF

5.43A

6.52A

ON

OFF

OFF

6.00A

7.20A

OFF

OFF

OFF

Microstep selection

Pulse/REV

SW5

SW6

SW7

SW8

Default

ON

ON

ON

ON

800

OFF

ON

ON

ON

1600

ON

OFF

ON

ON

3200

OFF

OFF

ON

ON

6400

ON

ON

OFF

ON

12800

OFF

ON

OFF

ON

25600

ON

OFF

OFF

ON

51200

OFF

OFF

OFF

ON

1000

ON

ON

ON

OFF

2000

OFF

ON

ON

OFF

4000

ON

OFF

ON

OFF

5000

OFF

OFF

ON

OFF

8000

ON

ON

OFF

OFF

10000

OFF

ON

OFF

OFF

20000

ON

OFF

OFF

OFF

40000

OFF

OFF

OFF

OFF

Default: The pulse can be customized according to customers’ requirements.

Common indicator

Phenomenon

Reason

Solution

 

 

 

The red indicator is on.

1. A short circuit of motor wires. Inspect or change wires
2. The external voltage is over or low than the driver’s working voltage. Adjust the voltage to a reasonable rang
3. Unknown reason Return the goods

Applications

It can be applied in a variety of small scale automation equipment and instruments, such as labeling machine, cutting machine, packing machine, drawing machine, engraving machine, CNC machine and so on. It always performs well when it is used in equipment which requires for low-vibration, low-noise, high-precision and high-velocity.

Driver functions descriptions

Driver function

Operating instructions

Output

current

setting

Users can set the driver output current by SW1-SW3 three switches.

The setting of the specific output current, please refer to the instructions of the driver panel figure.

 

Microstep setting

Users can set the driver Microstep by the SW5-SW8 four switches. The setting of the specific Microstep subdivision, please refer to the instructions of the driver panel figure.

 

 

Automatic half

current function

Users can set the driver half flow function by SW4. “OFF” indicates the quiescent current is set to half of the dynamic current, that is to say, 0.5 seconds after the cessation of the pulse, current reduce to about half automatically. “ON” indicates the quiescent current and the dynamic current are the same. User can set SW4 to ”OFF”, in order to reduce motor and driver heating and improve reliability.

Signal interfaces

PUL+ and PUL- are the positive and negative side of control pulse signal; DIR+ and DIR- are the positive and negative side of direction signal; ENA+ and ENA- are the positive and negative side of enable signal.

Motor interfaces

A+ and A- are connected to a phase winding of motor; B+ and B- are connected to another phase winding of motor. If you need to backward, one of the phase windings can be reversed.

Power interfaces

It uses AC power supply. Recommended operating voltage is 20VAC-80VAC, and power consumption should be greater than 350W.

Indicator lights

There are two indicator lights. Power indicator is green. When the driver power on, the green light will always be lit. Fault indicator is red, when there is over-voltage or over-current fault, the red light will always be lit; after the driver fault is cleared, if re-power the red light will be off.

Installation

instructions

Driver dimensions:150×98×51mm, please refer to dimensions diagram. Please leave 10CM space for heat dissipation. During installation, it should be close to the metal cabinet for heat dissipation.

 

Signal interface details:

 

The internal interface circuits of the driver are isolated by the opt coupler signals, R in the figure is an external current limiting resistor. The connection is differential. And it has a good anti-jamming performance.

 

Control signal and external interface:

Signal amplitudes

External current limiting resistor R

5V

Without R

12V

680Ω

24V

1.8KΩ

 

 

 


Product detail pictures:

Good Quality Stepper Servo Motor With Driver – DM860A AC20V-80V NEMA 34 stepper motor driver – Bobet detail pictures

Good Quality Stepper Servo Motor With Driver – DM860A AC20V-80V NEMA 34 stepper motor driver – Bobet detail pictures

Good Quality Stepper Servo Motor With Driver – DM860A AC20V-80V NEMA 34 stepper motor driver – Bobet detail pictures

Good Quality Stepper Servo Motor With Driver – DM860A AC20V-80V NEMA 34 stepper motor driver – Bobet detail pictures

Good Quality Stepper Servo Motor With Driver – DM860A AC20V-80V NEMA 34 stepper motor driver – Bobet detail pictures


Related Product Guide:
Cooperation

To be a result of ours specialty and repair consciousness, our corporation has won a good popularity amid consumers everywhere in the environment for Good Quality Stepper Servo Motor With Driver – DM860A AC20V-80V NEMA 34 stepper motor driver – Bobet , The product will supply to all over the world, such as: Thailand, Ecuador, Croatia, So We also continuously function. we, focuse on high quality, and are conscious of the importance of environmental protection, most of the merchandise are pollution-free, environmentally friendly solutions, reuse on the solution. We've Updated our catalog, which introduces our organization. n detail and covers the primary products we provide at present, You may also visit our web-site, which involves our most recent product line. We look forward to reactivating our company connection.

2 3 4 5 6

  • We are really happy to find such a manufacturer that ensuring product quality at the same time the price is very cheap.
    5 Stars By Roberta from Jersey - 2018.09.21 11:01
    The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
    5 Stars By Carey from Russia - 2018.06.18 17:25
    Write your message here and send it to us